| |
|
 |
Sunseap’s CPV12V10A is the world’s leading small solar charge controller for both professional and consumer applications.
CPV12V10A’s Technology:
* Suitable for use with low to medium power solar panels and arrays
* PWM battery charging
* Exceptional reliability
* Consistent high quality |
|
|
12 Volts 10 Amp ratings |
|
|
Work with all rechargeable battery types : Lead Acid (wet or sealed), NiCd and NiMH |
|
|
Common negative ground for Solar Panel and Battery 100% solid-state circuitry |
|
|
Analog controlled Pulse Width Modulation (ACPWM) battery charging |
|
|
Temperature compensated full voltage setpoint for optimal charging at different temperatures |
|
|
RFI suppression, designed to work with radio systems |
|
|
High voltage transient (surge) protection on solar panel input for limited lightning protection |
|
|
Battery rating : 12 Volts Nominal, 0.5 to 400 Amp Hours |
|
|
Photovoltaic Panel Rating : 12V Nominal (36 cell), 15-20 VOC, 0-20 ISC, 1W to 240W |
|
|
Voltage drop during charging : 0.5V @ 10A |
|
|
Float voltage adjustment range : 12V to 15V |
|
|
Equalize mode voltage increase : 1.5 Volts |
|
|
Temperature compensation : -7.5 mV/˚C |
|
|
Night time battery current drain : 0.5 to 1.9mA (1.3mA typical)
|
|
|
Rated Solar Input 10 A |
|
|
Rated Load 10 A |
|
|
25% Current Overload 5 min |
|
|
Regulation Voltage (12V Sealed Battery) 14.1 V |
|
|
Load Disconnect 11.6 V |
|
|
LVD Reconnect 12.6 V |
|
|
Temp Compensation -7.5 mV/˚C |
|
|
Self consumption 6 to 10 mA |
|
|
Operating Temperature -40 to +85 ˚C |
|
|
Wire Size 14 to 24 AWG |
|
|
Rated 16 A |
|
|
Terminals Tin plated over Zinc Alloy |
|
|
Screws Zinc plated over Steel |
|
|
Wire Protector Stainless Steel |
|
|
Weight 86.5 g |
|
|
Size 103mm (4 in) X 97mm (3.82 in) |
THE COMPANY
